Transmission Mission - It’s all in the timing

You have to reach that right speed before you can quickly shift your gears. Timing is crucial in getting the most out of your car’s powerful engine. You have to know when to get the beast out of your monstrous engine, as well as, taming the beast.

There are some ways to upgrade your transmission. You can choose from trusted transmission brands like Nissan, Mitsubishi, Tremec, and Honda. Honda makes different kinds of performance transmissions ranging from a basic one to custom made racing transmissions.

There are two types of transmissions: manual and automatic. Clutches are needed to engage or disengage a manual transmission, while with automatic transmissions torque converters take the place of clutches. Automatic transmissions are an advantage for racecars and cars with forced induction because even at a high rev, it can permit the car to stop. While on a stall, drivers then release the brakes for a super-charged launch.

Computers paved the way for the emergence of semi-automatic transmissions which we can say, give racecar drivers the best of both worlds.

In choosing gearboxes, choose those that are made of hard and durable materials to avoid breakage. Low-ratio gearboxes are said to provide improved acceleration and better mileage.

Another gearbox option is the sequential gearbox. This type of manual transmission gives the race driver the advantage of fast shifting. You only have to push the shift stick up every time you want to change to a higher gear, or pull the shift down if you want to use a lower gear.

Performance shift kits are available to make your shifting experience smoother and quicker. These shifts are well balanced and precise. Most of these performance shift kits are short, but easy to install.

Get your car a gear knob that will match your steering wheel or the interiors of your car. Gear knobs come in leather, carbon fiber, or choose an illuminated gear knob if this suits your fancy.

Always have your transmission fluid changed whenever it’s due to keep you shifting gears smoothly. Use synthetic oil with higher quality to take on the added heat due to continuous shifting.

http://www.cartuningcentral.com/transmission-mission-its-all-in-the-timing

VW Passat Tuning

VW introduced the Passat back in 1973 which were initially offered as two and four door sedans as well as versions with three- and five-doors. These versions shared a common style care of Giorgetto Giugiaro, an Italian designer. From that time on, the VW Passat continues to earn raves as well as criticisms from automobile raters and users.

Facelift for Passat

Some mechanical changes and alterations on style can be made to give the VW Passat a fresher look. Give this a new set of car projector-optic headlights, tail lights, bumpers and the car would look much better than when you first bought it. Owners may also opt for front suspension with four links which take out torque steering. To help avoid traction loss when driving on slick surfaces, a Torsen AWD system can be utilized for this purpose. Power can be improved and turbo charged with diesel with a TDI engine which produces 135 PS. Best part about this engine is that it utilizes diesel for fuel economy and its ability to operate with biofuels, an inexpensive alternative to gas. This Torsen AWD system usually comes with the four wheel drive version..

Upgrade to Safety and Function

From the Torsen system, one may now opt for Haldex multi-plated clutch which is available when using a 4-wheel drive version. What this upgrade does to your car is improved fuel economy with spacious interior that allows for more room. Haldex helps you direct your power by letting your car act as any four-wheel drive until it starts detecting slippage. In which case, half of your power will be diverted to the axle which is opposite that of the transmission or engine. There are a lot of things you can do to make the VW Passat a class of its own. Who says a family car can’t look like a sports car?

http://www.cartuningcentral.com/vw-passat-tuning

Toyota Yaris Tuning

Toyota Yaris is one of the latest feature cars of the Toyota. It has gone to be so successful that production of this latest Toyota flagship model is still in its momentum. Sporting a hip and compact look, the Toyota Yaris is, after all, an incarnation of what most Toyota fans have been asking for from Toyota. A stylish, compact and efficient car is what you asked for - and Toyota Yaris is what you get.

Toyota Yaris is ideally tailored as a family sedan that can accommodate four passengers. Comfort is perhaps one of its best features. With features like satellite navigation system, touch screen operation, Bluetooth, USB connection and full in-car sound system, you will, no doubt, feel the comfort of driving in your Toyota Yaris. And it can be bought for a $11,000 retail price, if you look hard enough. Performance-wise, however, Toyota Yaris does not have much to be proud of. At 50 to 150 BHP, the Toyota Yaris is not exactly your favorite runner. That’s why Toyota Yaris tuning may be exactly what you need.

Made of tensile steel, Toyota Yaris is rigid but lightweight - a feature you can take advantage of. Boosting your car engine’s with a supercharger may power up your engine’s efficiency and performance to as much as 30%. An ECU Tuning Chip may also do the trick. Be careful, though, because it’s no big secret that these procedures can be precarious.

Or you can use methods that will boost your Yaris’ performance, without handling its engine. The most popular choice is replacement of your tires with 15″ allow wheels. This will make your car a lot lighter, and therefore give less reason for your Yaris to run slow. There are also 18″ wheels, which you can use for traversing terrains. Tuning your Yaris by replacing the wheels can be a good option.

from : http://www.cartuningcentral.com/toyota-yaris-tuning

9 tips to keep your engine running smoothly

Tending to your car will enable your car to travel longer down the road and will give you a sense of pride when you are fixing your car. Auto owners need to pay more attention to their cars so the junkyards and the streets don’t get cluttered up. The more cars we can keep on the road, the cleaner the streets will be. Fixing your older car can be fun and exciting and will give you a greater sense of appreciation of the automobile. All of the parts can be found in the auto parts stores and if by chance you can’t find them there, you can always go online and find them.

Recent surveys show that 5 out of 10 accidents could have been diverted by just doing basic maintenance on your vehicle. Just by doing simple maintenance on your vehicle, you can extend the life of your car, helping with a healthier and stable environment.

Tending to the upkeep of your engine can save you gas mileage and give you more of an understanding of the operation of your vehicle. If you know more about your car, when something goes wrong, you will be able to know what it is instead of taking it to the shop and spend extra money you don’t have. Tending to your car starts at the very beginning, from the first day you buy the car.

Basic maintenance starts with your basic tune-up. For that you need spark plugs, ignition wires, a distributer cap and a rotor. Here are a few tips to keep your car up and running longer.

1. Change your oil every 3,000 to 5,000 miles. Your engine will start make weird noises if the motor is not kept up. When doing the oil change, make sure you change the oil filter as well. It will do no good if you run clean oil through a dirty oil filter.
2. Check the tires every month. By checking your tires it will make sure your alignment is not off causing uneven ware on your tires. Make sure the tires on your car are properly inflated. If the tires are under inflated or over inflated, that can lead to serious problems later down the road.
3. Check all of the fluid levels. The fluids you will need to check will include the power steering, brake, antifreeze, washer solvent and the transmission fluid. these fluids are essential for the operation and the safe running of the vehicle.
4. Inspect the muffler of the car when it is running to make sure that it has good air flow through it. If the muffler is plugged, make sure you replace it right away.
5. Clean the battery posts and cables when necessary and analyze the connection points for corrosion. Check the battery fluids and make sure it has enough fluid except for batteries that are maintenance-free.
6. Inspect engine belts for any knicks and tears. Make sure the belt is running on the right track. You don’t want to replace a belt or even worse, a water pump while you are sitting on the side of the road.
7. Underneath the car, you will find some grease receptacles to grease the moving components such as the ball joints and the tie-rods. Poor maintenance of these parts can put your car right into the ditch or even worse cause an accident.
8. Make sure all of your headlights and taillights work. It is just a simple bulb exchange from a bad bulb to a good one. Check all of the lights on your car to see if they all work, if they don’t, replace them as soon as you can.
9. Check and see if your wipers work. If the do, and wipe the windshield clean, you have nothing to worry about. If you turn your wipers on and you have streaks on the windshield, replace the wipers when you get a change. You need to see when you are out driving on the road.

http://www.cartuningcentral.com/9-tips-to-keep-your-engine-running-smoothly

Audi 80 Tuning

Despite being an older marque, the Audi 80, and it’s quattro variants, is still regarded as one of the finest automobiles for the tuning enthusiast giving good power range at very affordable prices. The Audi S2, a sport version with 2.2 liter turbo petrol engine was produced in 1991.

First manufactured in 1966, the Audi 80 had a long production run into the mid 1990s, with final cabriolet models rolling off the production line in 2000. One of Audi’s most popular models, the Audi 80 changed significantly over it’s development, although still retained the same classic lines through most variants.

Tuning an Audi 80 depends very much on year and engine type, and some parts for older variants may be very difficult to come by, resulting in quite a few owners of 1960s Audis having to source parts from wreckers yards or pay a premium for new parts manufactured by Audi.

Engine capacity and power output varied considerably over the thirty year production of the Audi 80, beginning with normally aspirated 1.6 liter engines right through to the final years of production when 2.0 liter petrol and 1.6 liter turbo diesel engines were fitted as standard.

The same body shape with larger 2.3 liter five cylinder engine and more luxurious interior trim was also marketed as the Audi 90. The two models are essentially the same, and a lot of cross compatibility of parts exists. In fact it is possible to drop a 2.3 liter from an Audi 90 into an Audi 80 with minor adjustment and proper tuning.

Tuning the Audi 80 for maximum performance should probably start with getting the engine and drivetrain back to as near new condition as possible, a full service and diagnostic analysis should be undertaken to ensure the baseline measurements conform to standard.

Owners of the turbo diesel and MPFI engines will get more performance thru acceleration and top end by re-chipping the car with an aftermarket chip, then tuning again with the new baseline. Most kits provide full installation instructions from removal of the old chip to soldering in the new chip an the entire process can take less than a couple of hours with the right setup.

Some models of Audi 80 do not feature a removable chip, and the entire computer will either need to be removed and sent to the chip programmer, or the car taken to a custom tuning workshop with the capability to reprogram the ECU.

Audi 80s are known for needing regular coolant changes, usually every two years, and before starting your cars performance tuning it’s a good idea to change the coolant and check for head gasket leaks.

Catalytic converters on the Audi 80 and variants can also be problematic, unfortunately it’s a design fault, and replacing this with one from a wreckers yard may not entirely solve the problem.

A new exhaust system with chrome tailpipes is an affordable option for tuning an Audi 80, and used systems may be readily available from trade and exchange markets.

from: http://www.cartuningcentral.com/audi-80-tuning

Giving Your Car a Thorough Auto Tuning

The automatic agreement is really important if you want to maintain your car in its form of first order. This will also improve your car 's handling as well as to increase it your car 'value of S.

If you have a car, you probably know the importance of the automatic agreement. There are people who reach the automatic agreement because a pastime and there is people who do really this for a life. When you subject your car to an automatic agreement, you basically give to somebody the right to modify it, improve usually its execution or its handling.

Some also make grant their cars to adapt their model. It is not as hard as you all would think and that it takes is a little of knowledge and competence. Automatic agreement of comprehension
The cars are pretty much generic. Yes, they can be worth million dollars but they are pretty much generic. They are not made specifically to adapt to your model or your needs. This is why there are people who make grant their cars.

There are really many manners of granting a car. You can make it pulverize with a different color. Does your car have a tedious blue paintjob? do you like black to have painted it with scratches of the lightning of the red on the sides? You can place accessories that perhaps useless but could return your to seem of good car. You could add in the spoilers, the skirts on side, the vents, the double exhausts and of the stops. You can pulverize symbols or other conceives as well.

One of many the development popular that the cars usually have is the engine grant upwards.

Except the agreement to the top of the engine, you can also make other things related to your engine with 'execution of S. You can adjust your economy of fuel or you can modify your car 's T/MN. All these things are made not only to improve the aesthetic value of your car, but to also allow an easier handling and a better comfort.
Nowadays, the automatic agreement is not something which is taken slightly. In fact, there are events which you can join. People really hold of the events so that the owners of car meet and for compete with. The judges will select usually the car with the best agreement. You can even gain prices to have the best automatic agreement. The car granting your needs for car

It is recommended that your car should obtain an air to the top of all the 30.000 miles. It is a good manners to prevent permanent damage with your car. A complete automatic agreement includes the replacement of the gasoline filter. Candles and wire of candle, hat and rotor of distributor, valves, belts, filter air and recycling of gases of the casing. You can want to check your levels of the fluid as well. If your transmission or brake needs some fluids, provide him some. Give to your battery a complete cleaning as well. While you are with him, check your brakes, lights, brushes of windscreen wiper and other measurements of car.

The automatic agreement is important. This prevents damage with your car. This allows easy handling as well. With the regular automatic agreement, you will make sure that you will always have a turn clean and worthy of confidence.

Maximizing Your Engine, Performance Tuning

By stuffing more horses in your engine used to take innumerable hours, cost a ridiculous stopper of box parts inside, and usually have like consequence to burst several articulations.

With recognition, with the agreement ordered by computer of vehicles of today 'of S is approximately as easy as playing Pong.

If you the 'VE considering the exposures of TV couple to obtain each droplet of power out of a traditional vehicle, you know that they spend the whole exposure with an time-out-of-date load of the video of them detaching the engine to put in the extremely technical parts and in an extravagant way expensive.

When him 's all does it, they turn the crank to the top of the dyno and become thoughtless above the profit of 3 powers in horses realized after roughly 4 work hours.

That 's not exactly how the majority would like to spend their weekend, and all for a negligible 3hp.

Naturally, 's to completely a little say there for these traditional computer-free that you can have full control more. However, when it has suddenly obtained more power in one nothing time and without having to tear your hands or piles of money launching cash on the parts hardware-to-find, a vehicle ordered by computer has a distinct advantage.

The good news is, you 'about probably driving a vehicle ordered by computer, like more sold during the century of last quarters. This made grant much easier, because a whole of programs determines how your engine carries out.

Replace simply your engine 'actions of S programming with some that 's adapted towards the execution and you will discover power gains almost immediately.

Just how can you obtain with those power gains in minutes? The answer is easy, with a programmer of power or the piece of execution, as those made by Hypertech or DiabloSport.

These programmers of power are designed to consider implementation plans created and examined by for. It 's so frank a cave man could do it.

Connect-Juste it with the port of OBD-II under your steering column, enter some simple yes orders or not to adjust how you want that the engine carries out, download the new programming, and you 'about loan to be rocked with 25 powers in horses or more. For the majority of people, this will take a 10 minutes maximum to achieve. Engines are installed to function the same thing for the enthusiasts of execution that they make for the octogenarians who believe that active more than 40 M/H is speed breakage-neck. You put 'falls of T in later, nor are you a carefree mom of football about the execution, you require it.

The programmers of execution aren 'average arrangements of T and that makes them a perfect match for you.

And, you put 't must worry about the guarantees. The companies which incite programmers to take into account safety with their arrangements and to promote them often give you manners of turning over to current arrangements for the service visits at the agency.

What 's more, as with all the mods of execution, you will be protected by federal law. He declares basically that your vehicle 'guaranteed S cannot be emptied by parts of execution unless they can be proven like source of breakdown.

Thus, there 's no good reason to wait if you 'about the glance to be connected easily on the true potential resting under your cap.

Auto Performance Tuning to your car

Each principal mobile body and minor of your car can refine-being granted to increase speed, Auto Performance Tuning, softness, and maneuverability. Left 's explore the key zones of the execution granting and see how each one can better contribute to the drive. Auto Performance Tuning.

Refine the agreement of engine

There are several key zones of agreement which can help to give your car or to exchange a push of engine. One is to install a piece of execution. A piece of execution can be equipped in the engines with the injection of fuel and a ECU, or the electronic case of order.

With a piece of execution, the engines theturbo one often have as consequence approximately a push of power of 10 percent while the engines the turbo one often see an increase of 25 to 30 powers in horses!

The engines also see a push of power with a cam of execution, which can be adapted by an experienced mechanic or a homemechanic really quite informed. The cams of approximately 270 degrees can amplify the engine to additional expenses 12 powers in horses.

A valve of pushed power can also be installed to replace the governor automatically-controlled fuel, which is located in the fuel line of return.

Agreement of execution of brake

Be sure to increase your power of braking before increasing the power in your car. The brakes are very important for your execution and safety although they are not considered execution-improvement of the devices.

A manner simple to improve braking is to install trimmings of execution and to fix discs of execution. The brake linings of execution increase the power of braking and can resist the temperatures much higher than the regular brake linings. Air filters and agreement

Probably one of the easiest tasks of development is to replace the air filters or the element of air filter in an air filter of execution. If you have a car fuel-injected, you can also increase the flow of air by removing the original airbox, which contains the air filter and the pipes and then the replacement of him by a kit of induction.

The kit is a filter of cone which can be fixed directly at the meter of circulation of air, so creating a flow of air more directed and uninterrupted to the engine. More air means better execution of engine.

Improvement of exhaust

With exhausts, you 'about not concentrating on what 's entering the engine, but what 's outgoing. There are exhausts of execution which to the minimum reduce restrictions of pressure for the vapors which are on their exit.

The Council: Replace the exhaust manifold made with the factory by a mark of market of the accessories which is granted to amplify the power.

A better turn with the increased suspension

The suspension is another sector of agreement of principal car which passes often unperceived. The lowering of the springs can be adapted to obtain a better glance and to feel for the car. Handling is improved because the springs reduce the bread by taking corners. Moreover, the tires will have improved the contact with the road.

These springs could feel like the standard springs while leading above small bumps in the road; however, by driving back them hard stiffen and reduce the bread. This gives comfort and improved handling. The reinforced shock absorbers and bushes also increase the suspension.